All India Metal Corporation

The SS 316 C Channel is C shaped and it is the second most material used for stainless steel products. The 316 channels can be used in sea water and high chloride ion rich environment. The 316 Stainless Steel C-channel also has molybdenum in the composition and can be used for food grade applications as well.

Additional Information:

• Production Capacity: 10000
• Delivery Time: 5 to 7 DAYS

Square Tube is a metal that has been formed into a square tube. It is measured by taking the outside dimensions (which are the same size) and then the wall thickness.

Additional Information:

• Production Capacity: 5000
• Delivery Time: 5-7 Days

A safety relief valve conforming to the requirements of Section I of the ASME pressure vessel code for boiler applications which will open within 3% overpressure and close within 4%. It will usually feature two blowdown rings, and is identified by a National Board 'V' stamp.

Additional Information:

• Production Capacity: 5000
• Delivery Time: 5-7 Days

Carbon steel pipe is the most common use piping material in different industries served for construction, structural, liquid transmissions for water, oil and gas/Carbon steel piping is a durable material made from carbon steel, a steel alloy with iron and carbon.

Additional Information:

• Production Capacity: 1000
• Delivery Time: 5-7 business Days

High pressure piping pressure classes refer to piping and valves that are over class 300, equal to a pressure nominal of 50bar.Burst test pressure capability its class 150 is at least 755 psi, with sustained pressure test capability of 500 psi. Typical applications for the pipe include municipal water mains, fire lines, and sewage force mains.

Additional Information:

• Production Capacity: 1000
• Delivery Time: 5-7 Business Days

This Process, like hot rolled bar , takes a billet and heats it until it malleable. This is where the processes differ, rather then rolling bar to get it to size, forging either hammers or presses the bar to the rough dimensions require .

Additional Information:

• Delivery Time: 5-7 Business Days

Large diameter steel pipe normally refers to the pipe diameter above 16 inch and up to 100 inch, it plays an important role in oil and gas transmissions. For long distance pipeline projects large diameter pipe could carry more liquid and with big flow rate.

Additional Information:

• Production Capacity: 10000
• Delivery Time: 5-7 Business Days

ASTM A 106 Grade B specification covers carbon steel seamless pipe for high-temperature service. These pipe are used for Welding, bending, Flanging and similar Operation. High Temperature Material should furnish to Specification A 530.

Additional Information:

• Production Capacity: 1000
• Delivery Time: 5-7 Buisness Days

Carbon steel forgings are created through a steel forging process that maximizes the natural strength and machinability of the forged material. Forged carbon steel can contain an unspecified number of alloys without a minimum required percentage.

Additional Information:

• Production Capacity: 5000
• Delivery Time: 5-7 Business Days

Description:

• Grade 2 titanium sheets are composed of pure titanium (99.2% titanium content) with small amounts of other elements, mainly oxygen and iron.
• They are non-magnetic and possess good formability, making them suitable for a wide range of applications.
• Grade 2 titanium is known for its outstanding corrosion resistance, especially in environments containing chlorides.
• It has a silver-gray color and a metallic luster.

Specifications:

• Titanium Grade 2 sheets typically conform to ASTM B265 or ASTM F67 standards.
• The chemical composition usually includes:
  • Titanium (Ti): 99.2% min
  • Oxygen (O): 0.25% max
  • Iron (Fe): 0.3% max
  • Carbon (C): 0.1% max
  • Nitrogen (N): 0.03% max
  • Hydrogen (H): 0.015% max

Additional Information:

• Production Capacity: 20000 kgs
• Delivery Time: 10-15 Days
• Packaging Details: Titanium sheets are typically packaged with care to ensure they arrive in excellent condition. Common packaging methods include wooden crates, cardboard boxes, or protective plastic wrapping. Sheets are often interleaved with paper or plastic sheets to prevent surface scratching during transportation. The packaging can vary depending on the supplier and the specific requirements of the customer.

• Titanium Grade 5 is an alloy composed of 90% titanium, 6% aluminum, and 4% vanadium.
• It is known for its high strength, low weight, and excellent corrosion resistance.
• This alloy exhibits good formability and weldability.

Additional Information:

• Production Capacity: 20000
• Delivery Time: 10-15 Days
• Packaging Details: Titanium Grade 5 sheets are typically packaged securely to prevent damage during transportation and handling. Common packaging materials include wooden crates, cardboard boxes, or metal containers. Sheets are often separated and protected with plastic or paper interleaving to prevent scratching or damage between individual sheets. Labels indicating material specifications, dimensions, and other relevant information are usually affixed to the packaging for easy identification.

Forged alloy steel blocks are created through a manufacturing method that utilizes localized compressive force shaping processes. The forging process begins when forged steel blocks are compressed within a die and custom shaped to exact project specifications.

Carbon steel threaded fittings combines high strength and good ductility with outstanding corrosion resistance qualities. They have excellent resistance to stress corrosion cracking and corrosion fatigue, providing permanent leak proof while adding strength and power to the piping structure. The output of these products occupies a large part of the steel pipe fittings

Additional Information:

• Production Capacity: 5000
• Delivery Time: 5-7 BusinessDays

In hydraulic-based applications, carbon steel valves are used for their high resilience to the corrosive tendencies of water and other liquids. Because of its high carbon content, it has very good mechanical properties and makes the valve device stronger and durable.

Additional Information:

• Production Capacity: 5000
• Delivery Time: 7-8 Days

Carbon steel is the most common type of steel used in fastener production. Grades 2, 5, and 8 are typically the standard for carbon-steel based screws and bolts, with alloyed carbon steel being a higher-end variation on these metals

Additional Information:

• Production Capacity: 5000
• Delivery Time: 5-7 Days

Carbon steel pipe is exactly what it sounds like – pipe made from carbon steel, a steel alloy containing iron and carbon. An incredibly durable material, carbon steel pipe is used in heavy-duty industries like infrastructure, shipping and chemical fertilizing.

Additional Information:

• Production Capacity: 5000
• Delivery Time: 5-7 Days

A gate valve, also known as a sluice valve, is a valve that opens by lifting a barrier (gate) out of the path of the fluid. Gate valves require very little space along the pipe axis and hardly restrict the flow of fluid when the gate is fully opened.

Additional Information:

• Production Capacity: 1000
• Delivery Time: 5-7 Days

Knife gate valves are designed mainly for on-off and isolation services in systems with high content of suspended solids. Knife gate valves are especially beneficial for handling slurry in addition to viscous, corrosive and abrasive media.

Additional Information:

• Production Capacity: 1000
• Delivery Time: 5-7 Days

A butterfly valve is from a family of valves called quarter-turn valves. In operation, the valve is fully open or closed when the disc is rotated a quarter turn. The "butterfly" is a metal disc mounted on a rod. When the valve is closed, the disc is turned so that it completely blocks off the passageway.

Additional Information:

• Production Capacity: 5000
• Delivery Time: 5-7 Days

Cast steel valves are valves that are made from cast steel, a type of steel that is made by casting the steel in a mold. These valves are used in a variety of applications, including oil and gas production, power generation, and chemical processing.

Additional Information:

• Production Capacity: 5000
• Delivery Time: 5-7 Days

Globe valves are used primarily in situations where throttling of the commodity is required. By simply rotating the handwheel, the rate at which the commodity flows through the valve can be adjusted to any desired level. Having the valve seat parallel to the line of flow is an important feature of the globe valve.

Additional Information:

• Production Capacity: 1000
• Delivery Time: 5-7 Days

Needle valves, sometimes referred to as plunger valves, are regulating valves and enable engineers to finely control and regulate water flow and pressure.

Additional Information:

• Production Capacity: 5000
• Delivery Time: 5-7 Days

Pinch valves facilitate opening and closing the flow of liquid through a tube without any contact between the liquid and the valve itself.

Additional Information:

• Production Capacity: 5000
• Delivery Time: 5-7 Days

Socket weld pipe fittings are used to permanently join pipes that are inserted into a recess in the fitting, flange or valve. Once correctly inserted, fillet type sealing welds are applied to join the pipe to the fitting.

Additional Information:

• Production Capacity: 5000
• Delivery Time: 5-7 Days

These threaded fittings have a high pressure rating, they're made out of forged steel. One big difference is that a malleable iron fitting is not very good with welding whereas, a threaded fitting, you can weld.

Additional Information:

• Production Capacity: 5000
• Delivery Time: 5-7 Days

EN102941-1 2005 E470 (Previously ISO 2938,BS6258) Hollow Bars are seamless tubes specifically produced for machining, manufactured to close concentricity and straightness tolerances; CHB combines excellent tensile properties with good weld ability.

Additional Information:

• Production Capacity: 5000
• Delivery Time: 5-7 Business Days

Nickle Strip is generally useful in the welding of battery points together to connect the batteries in combinations. These Nickel strips are popular because of their good performance while soldering as it gets soldered very quickly; easily with normal soldering metal with High tensile tension and Low resistivity.

Additional Information:

• Production Capacity: 60000
• Delivery Time: 5-7 Days

• Grade 1 titanium is the most commercially pure titanium grade, containing a minimum of 99.5% titanium.
• It is characterized by its excellent corrosion resistance in highly oxidizing environments, making it ideal for various applications where corrosion is a concern.
• Grade 1 titanium is soft, ductile, and easily formable, making it suitable for processes such as cold forming, deep drawing, and welding.
• Grade: Grade 1 (Ti-CP1)
• Composition: Minimum 99.5% titanium, with trace amounts of oxygen, nitrogen, carbon, and hydrogen.
• ASTM Standard: ASTM B265

Additional Information:

• Production Capacity: 20000
• Delivery Time: 10-15 days
• Packaging Details: Sheets and Plates: Typically packed in wooden crates, with appropriate cushioning and protective material to prevent damage during transit. Bars and Rods: Bundled or individually wrapped in protective materials and then placed in wooden boxes or crates. Tubes and Pipes: Protected with plastic caps, bundled together, and packed in wooden boxes or crates. Wire: Coiled and packed in wooden crates or on wooden spools.

Carbon steel is a popular material for fasteners due to its good tensile strength and ability to bear loads. It responds well to heat-treatments with minimal work hardening and brittleness. It is easy to machine and can meet the tight tolerances required for threading and fastener configurations.

Additional Information:

• Production Capacity: 5000
• Delivery Time: 5-7 Days

Titanium Grade 3 is a commercially pure titanium alloy that belongs to the family of unalloyed titanium grades, which also includes Grade 1 and Grade 2. It is characterized by its high purity, excellent corrosion resistance, and good weldability.

Additional Information:

• Production Capacity: 2000
• Delivery Time: 5-7 Days
• Packaging Details: Details on how the sheets will be packaged for shipping and storage.

Titanium Grade 4 is a low-alloy titanium grade with improved strength compared to pure titanium (Grade 1). Its addition of aluminum and vanadium enhances its mechanical properties while maintaining excellent corrosion resistance and biocompatibility. It is part of the alpha-beta titanium alloy group.

Additional Information:

• Production Capacity: 200000
• Delivery Time: 10-15 Days
• Packaging Details: In some cases, suppliers may offer custom packaging solutions based on your specific needs, especially if you're ordering large quantities or have unique requirements. It's important to note that the packaging details can vary from one supplier to another, so it's a good practice to discuss your specific packaging preferences and requirements with your chosen supplier when placing an order for titanium sheet Grade 4. This will help ensure that the sheets arrive in the condition you need them.

Check valves are widely used to prevent the reverse flow of fluids from passing through them. A Carbon Steel Check Valve is one of the various types of check valves available in the market. Some of them are simple swing discs whereas some are switch check valves. Carbon Steel Check Valve manufacturer in India recommends these valves due to their durability and ability to withstand high temperature and pressure. When differential pressure in a check valve is high there can be a drop in pressure when passing through the valve. Hence it is important to amount of pressure required to open a valve. 

Additional Information:

• Production Capacity: 5000
• Delivery Time: 7-10 Days

The valve design provides a full bore opening which makes it efficient due to its low head loss characteristics. Swing check valves are generally used for systems where the risk of pressure surges is low. Due to the full bore opening, this valve is commonly used in water and wastewater applications.

Additional Information:

• Production Capacity: 500
• Delivery Time: 5-7 Days

The carbon steel alloy offers good ductility and tensile strength. These heat exchangers are possessing superior resistance to corrosion and oxidation at harsh climatic circumstances. These also enhance good creep strength and hardness. The addition of other content facilitates good toughness and durabil

A buttweld fitting is a weldable pipe fitting that allows for change of direction of flow, to branch off, reduce pipe size or attach auxiliary equipment. Forged Steel buttweld fittings are manufactured in accordance with ANSI / ASME B16. 9.

Additional Information:

• Production Capacity: 5000
• Delivery Time: 5-7 Business Days

Carbon Steel Flanges are one such type of flange that is usually made up of carbon steel. This material provides properties such as resistance to corrosion, excellent durability, and finishing in goods. They are available in various types. For instance,Carbon Steel Blind Flanges are used to terminate the pipe.

Additional Information:

• Production Capacity: 5000
• Delivery Time: 5-7 Business Days

Carbon steel piping is a durable material made from carbon steel, a steel alloy with iron and carbon. Because of its strength and ability to withstand stress, carbon steel pipe is used in a variety of heavy-duty industries like infrastructure, ships, distillers, and chemical fertilizer equipment

Additional Information:

• Production Capacity: 1000
• Delivery Time: 5-7 Business Days

Forged rings are metal rings that are made from a forging process. Forging is a manufacturing process that shapes metal by hammering, pressing, or rolling hot metal while it is in a molten state. Forged rings are stronger and more durable than those made by other manufacturing processes.

Additional Information:

• Production Capacity: 10000
• Delivery Time: 5-7 Days

Flanged shafts, crankshafts and forged step shafts are used in a wide variety of industries including oil and gas exploration, machinery, gear manufacturing, aircraft and aerospace, energy and power generation, defense, automotive, heavy industrial, manufacturing, general metalworking, petroleum and chemical, mining

Additional Information:

• Production Capacity: 5000
• Delivery Time: 5-7 Business Days